5.2 Schlüter
®
-BARA-R
Text template for tenders:
Supply
_____ per metre Schlüter
®
-BARA-R as a
T
-shaped edging profile, made of powder-
coated aluminium, and install the trapezoid-
perforated anchoring leg into the load-distribu-
tion layer in a professional manner and according
to the manufacturer’
s specifications.
Accessories, such as corners and connectors
n
are to be included in unit prices.
n
are to be charged as extra.
Profile height: _______________________
mm
Colour:
________________________________
Art.-No.: ______________________________
Material: _________________________....../m
Labour: __________________________....../m
Total: ____________________________....../m
Installation
1. Schlüter
®
-BARA-R is placed at the edge
area and using a mortar layer, it is set to
the right height and aligned. For outside
corners, corresponding special corner
pieces are available. Between the ends
of two profiles, a space of approximately
5 mm is left and covered by clipping on a
connector.
2.
Balcony and terrace surfaces shall be
filled with mortar to the height at which
the mortar bed’s structural reinforcement
(AKS lattice) is placed. In doing so, the
reinforcing lattice must overlap the an-
choring leg of the profile.
3.
To produce the load distribution layer
, the
screed mortar is applied at the appropri-
ate height and slope using the upper
edge of Schlüter
®
-BARA-R as a screeding
guide. If Schlüter
®
-DITRA is to be installed
as an uncoupling and bonded waterproof
membrane, the screed is levelled 3 mm
below the top of the profile and carefully
compacted.
4. Please
Note:
Schlüter
®
-TROBA or Schlüter
®
-TROBA-
PLUS must be laid as an area drainage
layer between the waterproofing layer and
the screed.
Schlüter
®
-BARA-R
Colours: HB = light beige, RB = red brown, SB = black brown, PG = pastel grey, BW = brilliant white
Length supplied: 2.50 m
Colours
HB
RB
SB
PG
BW
H = 35 mm / a = 16.5 mm
•
•
•
•
•
H = 42 mm / a = 20
mm
•
•
•
•
•
H = 50 mm / a = 29
mm
•
•
•
•
•
H = 70 mm / a = 44
mm
•
•
•
•
•
Corner
90°
•
•
•
•
•
Connector
•
•
•
•
•
Product overview:
5.
Tiles shall be laid in such a way that they
extend approximately 20 mm beyond
the edge of the profile. When using an L-
shaped ceramic edge trim, a space of ap-
proximately 10 mm must be left between
the vertical leg and Schlüter
®
-BARA-R.
Maintenance
Schlüter
®
-BARA-R requires no special or
preventative maintenance. The aluminium
profile’
s powder-coated surface is col-
ourfast. Damages to the surface shall be
repaired by re-coating.
Art.-Nr
. 550 501 – 07/05 Issue – Reprints will invalidate this issue.
Schlüter-Systems KG
· Schmölestraße 7 · D-58640 Iserlohn · Tel. 00
49
/
2371
/
97
1-0 · Fax 00
49
/
23
71
/
97
1-111 · Internet www.schlueter-systems.com
Schlüter-Systems Ltd.
· Units 4-5 Bardon 22 · Beveridge Lane · COALVILLE · Leics. LE67 1TE · Tel. 00 44 (0) 1530
813396 · Fax. 00 44 (0) 1530
813376
Internet www.schluter.co.uk · E-mail technical@schluter
.co.uk · sales@schluter.co.uk
