I
N
N
O
V
A
T
I
V
E
P
R
O
F
I
L
E
S
3.
1 Schlüter
®
-TREP-T/-MT/-TL
S
T
A
I
R
N
O
S
I
N
G
P
R
O
F
I
L
E
F
O
R
S
A
F
E
T
Y
O
N
S
T
A
I
R
S
Application and Function
Schlüter
®
-TREP-T/-MT/-TL is a special pro-
file made of rigid PVC with a soft, non-slip
PVC wear surface for a safe and visually
appealing stair nosing design.
Schlüter
®
-TREP-T has a consistent, uniform
colour at the wear surface (four colours are
available), while Schlüter
®
-TREP-MT fea-
tures a decorative brass inlay.
The profile Schlü
ter
®
-TREP-TL features a lumi-
nescent inlay, which glows for up to 10 hours
after exposure to light. This increases the
visibility of stair edges in the dark and at
dusk.
Schlüter
®
-TREP-T/-MT/-TL are intended for
residential use or light commercial areas.
The profiles are permanently installed in
the covering and cannot be replaced when
damaged by excessive wear (Schlüter
®
-
TREP-S and -B offer replaceable inserts).
Schlüter
®
-TREP-T/-MT/-TL protects stair
edges and reduces the risk of accidents
through its non-slip tread design and in-
creased visual acuity
. Matching end caps
are available.
Material
Schlüter
®
-TREP-T is made of rigid PVC with
a soft, non-slip PVC wear surface.
In addition, Schlüter
®
-TREP-MT features a
decorative brass inlay covered with a clear,
soft PVC layer.
Schlü
ter
®
-TREP-TL is produced with a lumi-
nescent inlay and covered with transparent
soft PVC.
Material Properties
and Areas of Application:
The material is resistant to most chemicals
commonly encountered in tiled environ-
ments.
Schlüter
®
-TREP-T/-MT and -TL are inten-
ded for residential areas with light to me
dium
traffic, or similar applications.
The profiles are permanently installed in
the covering and cannot be replaced when
damaged by excessive wear.
In special cases, the suitability of a proposed
type of profile must be verified based on
anticipated chemical, mechanical, and/or
other stresses.
= H
19 mm
